Astera FP6 HydraPanel - FP6
Astera
AS-FP6
Add to cart
  • Description
  • More

Astera FP6 HydraPanel

Astera HydraPanel FP6 in the box:
1x HydraPanel (FP6)
1x DiffusorSheet 100 (FP6-DS-100)
1x GelHolder (FP6-GH)
1x SoftFrame 100 (FP6-SF-100)
1x Intensifier 80 (FP6-INT-80)
1x EggCrate 40 (FP6-EGC-40)
1x EggCrate 60 (FP6-EGC-60)
1x FlexBase (FP6-FB)
1x ConnectorPlate (FP6-CP)
1x BabyPin 1/4“ (AX-BBP-1/4)
2x Waterproof Protection Cover for PixelBrick & HydraPanel (PB15-PLG

Astera HydraPanel FP6 wireless LED Panel with six included light modifiers and a large range of mounting options make HydraPanel more flexible than any other product in its class. The full-spectrum Titan LED Engine generates an impressive 1300 Lumen output while running on battery power.

Astera HydraPanel FP6 control:
• App Control:
The AsteraApp offers intuitive and fast control of complex lighting setups and is also used for prepration and monitoring Astera lights.

• Wireless DMX:
The Astera HydraPanel FP6 contains a wireless DMX module by Lumenradio enabling the AX9 to be controlled by CRMX and W-DMX transitters alongside other wireless fixtures. The AsteraBox has built-in CRMX and can be used to transmit DMX data to you lights

• Wired DMX:
Connect power and DMX, Artnet or sACN to an Astera PowerBox. Then connect your lights with a Power/data combination cable. the PowerBox 2x 86W is recommended for teh hydraPanel but teh Titan PowerBox and Datalink can also bu used to establish a wired DMX onnection

• On your light:
The control panel offers intuitive control over your fixture. Dedicated buttons offer swift control over brightness and HSI colors. The TouchSlider allowws quick selections of color, brightness and more...!

Astera HydraPanel FP6 Mounting Options:
• Angle with FlexBase
• Mount on walls and ceilings
• Connect to grips
• Hang via EyeBolts
• Integrated Cold Shoe
• Backside Magnet
Astera HydraPanel FP6 specifications
• Titan LED Engine
• Colors RGBMintAmber
• Total LED Power 25 W
• LED Power Draw 17 W
• Light Output 3200 K 1m 443 Lux
• Light Output 4000 K 1m 512 Lux
• Light Output 5500 K 1m 516 Lux
• CRI (Ra)/ TLCI 3200- 6500 K > 96
• Beam Angle 110º x 100º
• Field Angle 150º x 145º
• Strobe 0 - 25 Hz
• Pixels 6
• Battery Runtime up to 20 hours
• Battery Runtime Max Brightness 1h 45m
• Battery Lifetime 70% after 300 cycles
• Charging Time (nominal) 3 hours
• DC Input 24VDC - 0.85 A
• DC Connector 5,5 mm x 2,1 mm
• Wired DMX Yes Via FP1-PWB/FP3-DTL/PWB2-86
• CRMX Receiver Built-in
• BluetoothBridge BTB Built-in
• Wireless Protocols CRMX, UHF, Bluetooth, WiFi
• Wireless Range CRMX/UHF Up to 300 m
• Bluetooth Up to 3 m
• Infrared Control Yes
• ControlSync Yes
• TouchSlider Yes
• Housing Material Polymer & Metal
• IP Rating IP65
• Ambient Operating Temperature 0 - 40º C
• Weight 604 g
• Dimensions L x W x D 166 mm x 85 mm x 43.5 mm
• Mounting Options 2 x ColdShoe 3 x M5 thread 1 x SafetyWire Eyelet

Astera HydraPanel FP6 Light Modifiers:
Attach Magnetic Modifiers
Snap on the 6 included light modifiers via their magnetic corners to adjust the beam from 40° to 100.

DiffusorSheet 100:
Gives a soft light with about 100° beam without increasing its height. Useful for lighting up people.
SoftFrame 100:
Enables an even softer light with 100° beam by distancing the filter from the HydraPanel. This one is useful when mounting HydraPanel on a camera, to build structures on stages and creates good shadows.

Intensifier 80:
Creates a more narrow beam with 80° for a longer throw and close ups where you need more light. The Intensifier 80 contains magnets on its top, so that the 2 Egg Crates can be added.

EggCrate 40:
Cuts off spill light around the beam and avoids glare. Results in 40° beam.

EggCrate 60:
Cuts off spill light around the beam and avoids glare. Results in 60° beam.

GelHolder:
A transparent sheet which can hold a filter gel in place.

SnapBag:
DOP Choice offers a SnapBag with Magic Cloth and Half Grid Cloth as accessory for HydraPanel.