Astera color-tunable NYX LED bulb FP5-SET is developed for professional film, stage and event productions. Not bigger than a normal LED bulb, it contains a CRMX receiver as well as RF and Bluetooth modules for the AsteraApp. It can be powered via lamp socket or with a standard power bank and thanks to its Titan LED engine it displays precise colors and white tones with ultra-high CRI and TLCI. Available in white and black.
• AC Power
NYX Bulb can be screwed in and powered by lamp sockets just like any other light bulb. To comply with international standards it is available in 3 different versions: E26, E27 & B22.
• DC Power
On the NYX Bulbs’s side Astera has included a DC socket for 5~18VDC power so it can be used whenever AC power is not available. The Astera PowerStation as well as a standard power bank can be used to power a bulb for several hours. Also available is an adapter cable for D-tap batteries.
Astera NYX Bulb FP5 control:
• App Control:
The AsteraApp offers intuitive and fast control of complex lighting setups and is also used for prepration and monitoring Astera lights.
• Wireless DMX:
The Astera FP5 contains a wireless DMX module by Lumenradio enabling it to be controlled by CRMX and W-DMX transitters alongside other wireless fixtures. The AsteraBox has built-in CRMX and can be used to transmit DMX data to you lights
• PowerStation:
The Astera optionally PowerStaion can be used as an externam display for FP5 NYX Bulbs. Connect it and set a color, DMX address etc which NYX Bulb will remember when disconnected.
• NYX Bulb Designed to be discrete
The black NYX Bulb is designed to blend into dark environments, e.g. when used on stages and ceilings. Brightness and features are just like its white sibling.
• NYX Bulb Battery Pack
Use PowerStation as a external battery to power a NYX Bulb for several hours.
• External display
PowerStation works like an external display and control panel for NYX Bulbs. You can set colors, brightness, runtime, DMX addresses and more. After being disconnected, the bulb will remember its setting so that it can be used without PowerBox.
• Multiple mounting options
PowerStation enables your NYX Bulb to be mounted anywhere:
- Add grips via Airline Tracks
- Suspend via PowerStation Hanger
- Attach to metal via backside magnets
• D-Tap Split Cable
Set up your NYX Bulb anywhere you want with this super-useful accessory. Up to 8 bulbs can be powered from one 14.4V V-mount battery with D-tap socket via the 1.5m long cables.
• CupBouncer
CupBouncer is a beam modification accessory. It attaches via suction cup to the NYX Bulb and reflects light back towards the base of the light. This means that you can illuminate lamp shades more evenly without a hot spot on top.
• SnapBag for NYX Bulb
SnapBag for NYX Bulb allows you to control the wide spread beam and soften it even more with the included grid cloth
Astera NYX Bulb FP5 specifications:
• LED Engine: Titan LED Engine
• Colors: RGBMintAmber
• Total LED Power: 14W
• LED Power Draw: 10
W
• Luminous Flux 3200K: 618 Lumens
• Luminous Flux 4000K: 750 Lumens
• Luminous Flux 5500K: 683 Lumens
• Light Output 3200 K 1m: 114 Lux
• Light Output 5500 K 1m: 124 Lux
• CRI (Ra)/ TLCI 3200- 6500 K >96
• Beam Angle: 155°
• Field Angle: 205°
• Strobe: 0 – 25 Hertz
• Pixels: 1
• DC Input: 5-18 VDC, 2.1 A
• DC Connector: 3.5 mm x 1.35 mm
• AC Input: FP5-E26: 100-120 VAC, FP5-E27: 100-240 VAC, FP5-BC: 100-240 VAC
• AC Connector: E27 (EU) / E26 (US) / BC (on special order)
• Wired DMX: No
• CRMX Receiver: Built-in
• BluetoothBridge BTB: Built-in
• Wireless Protocols: CRMX, UHF, Bluetooth
• Wireless Range: CRMX/UHF up to 100 m / Bluetooth up to 3 m
• Infrared Control: Yes
• Housing Material: Metal & Polycarbonate
• IP Rating: IP44: connected via AC + FP5-SP in DC socket IP20: connected via DC socket
• Ambient Operating Temperature: 0 – 40 °C
• Weight: 240 g
• Dimensions L x W x D: 70 mm x 130 mm
• Mounting Options: E26/27/BC socket
<
