Astera AX2-50 PixelBar Wireless Linear Wash Fixture - 50cm - AX2-50
Astera
AS-AX2-50
Bestel
  • Beschrijving
  • Meer

Astera AX2-50 PixelBar Wireless Linear Wash Fixture - 50cm

Astera’s Wireless PixelBar AX2-50 (50cm) is a linear wash fixture with built-in battery pack. Each of its LEDs can be individually addressed and offers ultra-high color rendering, digital color calibration and a native 21° beam. Thanks to its smart stands, hanging bracket, connectable endcaps and the integrated airline track it can be quickly assembled in numerous ways and is suitable for a wide variety of applications such as concert/touring, corporate events, TV etc.

The Astera AX2 PixelBar-50 can be controlled via the AsteraApp, Wireless DMX, Wired DMX and on the fixture itself.

The PixelBar is available in 1m (16 x 10W LEDs) and 50cm (8 x 10W LEDs).

Astera AX2-50 PixelBar:
• Photometrics:
2700 K at 1m 8.995 Lux 3200 K at 1m 11.060 Lux 5500 K at 1m 11.010 Lux • Astera Titan LED Engine
• Colors: Red, Green, Blue, Mint, Amber
• Total LED Power: 80W
• LED Power Draw: 40W
• CRI/TLCI: >96 • BeamAngle: 21°
• Field Angle: 42°
• Strobe: 0-25Hz
• Pixels: 16
• Battery Lifetime: 70% after 300 cycles
• Battery Runtime: Up to 20 hours
• Charging time (nominal): 5 Hours
• AC Input: 96-264 VAC, 50/60 Hertz, 2 A, 49W
• AC Connector: PowerCON TRUE1 IN/OUT
• Wired DMX: Yes (via 5-pin XLR)
• CRMX Receiver: Built-in
• BluetoothBridge BTB: No
• BarConnect+: Yes
• Wireless Protocols: CRMX, UHF
• Wireless Range CRMX/UHF: up to 300 m
• Infrared Control: Yes
• Housing Material: Aluminium
• IP Rating: IP65
• Ambient Operating Temperature: 0 - 40 °C
• Weight: 4.5 kg
• Dimensions without hook (L x W x D): 500 mm x 165 mm x 65 mm
• Dimensions with hook (L x W x D): 520 mm x 165 mm x 65 mm
• Mounting Options: Airline Track, 2x AX2 Feet (with 3/8" thread)

• Barconnect+:
Astera AX2-50 Pixelbars can be connected without the need of additional tools or products, just insert them from the top and lower them until you hear a "click". A release button can be found at the bottom of the PixelBar.

• Consisteny Pixel Pitch:
Consisteny Pixel Pitch throuhout all Ax2s connected with Barconnetc+

• Angle connect units:
Angle an entire row of connected PixelBars as one big unit to save time and ensure even wall illumination. The AX2's feet include a quick-release clamp that is easy to open and close.

• DMX Auto-Adressing:
Lights connected via Barconnet+ communicate with each other. When stting DMX addresses according to the selected DMX profile an position

• Perfect Color Mixing:
Precision Optics from Gaggione with 21° enable perfect color-mixing from floor to ceiling that starts right above the lenses. • Airline Track:
We have included Airline Tracks at bottom and backside of the fixture. This allows to attach mounting accessories such as TrackPin and TrackHanger and is also used to connect the AX2’s feet.

• Multi-functional feet:
The multi-functional feet allows you to adjust the angle of a AX2 or a whole row of connected AX2 units. Tilting is possible up to 90° by rotating the foot’s base plate. Feet can be attached to backside or bottom via Airline Track.


• Light Modifieres:

30° Filter Insert filter into light to get a 30° beam. Recommended for wallwashing and as downlight.

60° Filter The 60° filter is a good choice when you want to have a footlight or use the AX2 as a sidelight.

120° Filter Insert filter into light to get a 120° beam. Good to create a nice soft light and to illuminate larger areas. Barndoors Barndoors can be added to both sides of the AX2 and act as a glare shield and to control the beam.