Astera FP1-BTB-SET Titan Kit of 8 Titan BTB LED Tubes with Charging Case - FP1-SET

Astera
AS-FP1-SET
Bestel
  • Beschrijving
  • Meer

Astera FP1-BTB-SET Titan Kit of 8 Titan BTB LED Tubes with Charging Case

Astera Titan 8 Tube kit FP1-BTB-SET in the box:
8x FP1 Titan Tube (FP1)
1x PowerBox (FP1-PWB)
16x EyeBolts (FP1-EBLT)
16x Holder (AX1-H)
16x Babypin (AX1-BLT)
8x Stand (AX1-STD)
8x DC cables
1x PowerCON TRUE1 cable
8x Waterproof covers for charging port (FP1/2-SP)
1x Charging case for Titan Tube

The Astera Titan Tube FP1-BTB-SET is a Kit of 8 Astera Titan Tubes with all essential accessories stored in a durable protective plastic case with wheels and handles. With the included PowerBox you can charge your lights in the case to get them ready for their next job. For longer installations, the PowerBox can be taken out of the case to supply power and data via the optionally available Titan Power/Data Combination cables.

The Astera Titan Tube FP1-BTB-SET is RGBMA, 16 Pixels, 72W, IP65 has also a built in battery which make it the ultimate LED tube for filmmakers, studios, event technicians and any creative imagemaker. It emits powerful, tunable whites with ultra-high color rendering as well as colored light which can be applied to individual pixels or the whole tube. The tube offers unlimited range of usage; indoor or outdoor, AC-powered or on battery, on the go with the AsteraApp, with wired or wireless DMX

Astera Titan FP1-BTB control:
• App Control:
The AsteraApp offers intuitive and fast control of complex lighting setups and is also used for prepration and monitoring Astera lights.

• Wireless DMX:
The Astera FP1-BTBT-SET contains a wireless DMX module by Lumenradio enabling the AX9 to be controlled by CRMX and W-DMX transitters alongside other wireless fixtures. The AsteraBox has built-in CRMX and can be used to transmit DMX data to you lights

• Wired DMX:
Included with the Astera FP1-BTB-SET 5-pin XLR in + out sockets for a solid wired DMX connection. This enables the AX9 to be used as a wired PAR for longer installations.

• On your light:
The control panel offers intuitive control over your fixture. Dedicated buttons offer swift control over brightness and HSI colors

Astera PF1-BTB Titan Tube specifications:
• Colors: Red, Green, Blue, Mint, Amber
• Tunable White 1.750K to 20.000K.
• Total LED power: 72W
• Maximum power draw: 48W
• TLCI: +96 CRI: +96
• Boost Mode
• Luminous flux: 2900Lm
• Emittance @1m: 785Lx
• Strobe: 0-25Hz
• Beam Angle: 120º
• Field Angle: 180º
• Pixels: 16

• Battery Lifetime: 70% after 300 cycles
• Battery Runtime: Up to 20 hours
• Charging time (nominal): 3 Hours
• DC Input: 24V-2A
• DC Connector: 5.5 mm x 2.1 mm
• Wired DMX: Yes (via FP1-PWB / FP3-DTL / PWB-2-86)
• CRMX Receiver: Built-in
• BluetoothBridge BTB: Yes
• Wireless Protocols: CRMX, UHF, Bluetooth, WiFi
• Wireless Range: CRMX/UHF up to 300 m, Bluetooth up to 3 m
• Infrared Control: Yes
• Housing Material: Polycarbonate, metal end caps
• IP Rating: IP65 (only with FP1-SP)
• Ambient Operating Temperature: 0 – 40 °C
• Weight: 1.35 kg
• Dimensions (L x Diameter): 1035 mm x 43 mm
• Mounting Options: 2x M5 thread, 2x Holder (with 2x M5 and 1x 1/4"-20UNC thread), 1x TubeStand

Astera FP1-BTB BUILT-IN BATTERY
Titan Tube has a powerful built-in battery. With the Astera “seamless runtime” technology, it can be set to a specific length of time to ensure that your lights won’t run out of battery while still getting the maximum brightness. When displaying white light in maximum brightness, it will last 1 h 45 min.

HOW TO WIRE:

• Titan PowerBox
Essential accessory for Titan Tubes. Use it to charge or install up to 10 Titan Tubes or Helios Tubes for longer operation. Also allows wired data transfer from DMX, Artnet and sACN sources.

Alternatively, the PowerBox 2x86W is compatible, but only connects 2 lights at a time.

• Titan Power/Data Combination Cable
Connects Titan Tube & Helios Tube to their PowerBox. Groundbreaking technology enables power and data to both run through a single cable for maximum convenience.

Available in 1.5 m, 5 m, 10 m, 15 m, 200 mm

• DataLink
A data injector used to establish a wired DMX connection if no Titan PowerBox is available or to add another DMX universe to a PowerBox. DataLink does not have a built-in power supply, so it requires a PowerBox or single tube PSU to work.

• Individual Power Supply
AC to DC power converter to charge 1 Titan Tube or Helios Tube or to wire it for a longer installation. Usable in most countries since it comes with EU, US, UK adapters and accepts 110-240VDC. 1 m cable length and 24VDC, 2A output.

• Extension Cable
Add 5 m cable length to your Titan, Helios or Hyperion power supply. Male to female cable.

Seamless Runtime
To ensure that your Astera light’s batteries last throughout your entire production, you can select how many hours they have to last. This limits the light’s output to a level where you get the maximum brightness to achieve the selected runtime.

Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat. Turn multiple programs and lights into scenes.

Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.

Anti-Theft
When enabled, the integrated theft alarm gives visual and audible alarm if lights are being moved. In addition, the AsteraApp also shows the alarm.

Emergency Light
With this innovative feature, the lights can double as a battery-powered emergency light. When activated, the fixture can detect power loss and instantly switches to bright white light to illuminate the venue.