Astera FP3-BTB Hyperion BTB LED Tube - FP3
Astera
AS-FP3
Bestel
  • Beschrijving
  • Meer

Astera FP3-BTB Hyperion BTB LED Tube

Astera Hyperion Tube FP3-BTB in the box
1 x Hyperion Tube (FP3)
2 x TubeHolder (AX1-H)
2 x Eyebolt (FP1-EBLT)
1 x DC Socket Cover (FP1/2-SP)

Astera has created after the enormous success of the Astera Titan Tube the double length Hyperion Tube FP3-BTB, which measures just over 2 meters and around 80 inches. Double the LEDs, double the batteries, double the brightness, double the pixels and the same high-quality light with App, CRMX and on-tube control and wired DMX option.

The Astera Hyperion FP3-BTB is RGBMA, 32 Pixels, 144W, IP65 LED Tube and has also a built in battery which make it the ultimate LED tube for filmmakers, studios, event technicians and any creative imagemaker. It emits powerful, tunable whites with ultra-high color rendering as well as colored light which can be applied to individual pixels or the whole tube. The tube offers unlimited range of usage; indoor or outdoor, AC-powered or on battery, on the go with the AsteraApp, with wired or wireless DMX

Astera Helios FP3-BTB control:
• App Control:
The AsteraApp offers intuitive and fast control of complex lighting setups and is also used for prepration and monitoring Astera lights.

• Wireless DMX:
The Astera FP3-BTB contains a wireless DMX module by Lumenradio enabling the AX9 to be controlled by CRMX and W-DMX transitters alongside other wireless fixtures. The AsteraBox has built-in CRMX and can be used to transmit DMX data to you lights

• Wired DMX:
Data can be aded via DataLink, a dat injector for Hyperion Tubes with power pass-through. Connec up to 4 Power Supplies, add DMX, Artnet or sACN and connect up to 4 Hyperion Tubes with Titan Power/Data Combination Cables

• On your light:
The control panel offers intuitive control over your fixture. Dedicated buttons offer swift control over brightness and HSI colors

Astera Hyperion FP3-BTB specification:
• LED Engine: Titan LED Engine
• Colors: RGBMintAmber
• Total LED Power: 144 W
• LED Power Draw: 92 W
• Luminous Flux 4000K: 5800 Lumens
• Light Output 4000K 1m: 1570 Lux
• CRI (Ra)/ TLCI 3200- 6500 K: >96 • Beam Angle: 135° x 115°
• Field Angle: 175° x 160°
• Strobe: 0 – 25 Hertz
• Pixels: 32
• Battery Runtime: up to 20 hours
• Battery Lifetime: 70 % after 300 cycles
• Charging Time (nominal): 3 hours
• DC Input: 24 VDC – 4 A
• DC Connector: 5.5 mm x 2.1 mm
• Wired DMX: Yes (via FP3-DTL / PWB-2-86)
• CRMX Receiver:: Built-in • BluetoothBridge: BTB Built-in
• Wireless Protocols: CRMX, UHF, Bluetooth, WiFi
• Wireless Range: CRMX/UHF up to 300 m, Bluetooth up to 3 m
• Infrared Control: Yes
• Housing Material: Polycarbonate, metal end caps
• IP Rating: IP65 (only with FP1-SP)
• Ambient Operating Temperature: 0 – 40 °C
• Weight: 2.9 kg
• Dimensions: 2 031 mm x 43 mm
• Mounting Options: 2x M5 thread, 2x Holder (with 2x M5 and 1x 1/4"-20UNC thread)

Astera Hyperion FP3-BTB BUILT-IN BATTERY
The Hyperion LED Tube has a powerful built-in battery. With the Astera “seamless runtime” technology, it can be set to a specific length of time to ensure that your lights won’t run out of battery while still getting the maximum brightness. When displaying white light in maximum brightness, it will last 1 h 45 min.

HOW TO WIRE:

• DataLink
A data injector with power pass-through which is used to establish a wired DMX connection to Hyperion Tubes. It does not have a built-in power supply but requires one Titan or Hyperion PSU per tube.

• Titan Power/Data Combination Cable
Among several other purposes, this cable connects Hyperion Tube to DataLink. Groundbreaking technology enables power and data to both run through a single cable for maximum convenience. If not available, the newer Power/Data Combination Cable with 90° connectors can also be used.

Available in 1.5 m, 5 m, 10 m, 15 m, 200 mm

• Individual Power Supply
AC to DC power converter to charge 1 Hyperion Tube or to wire it for a longer installation. Also compatible with Titan and Helios Tube. 1.2 m cable length on AC side, 1.5 m cable length on DC side. 24VDC, 4A.

• Extension Cable
Add 5 m cable length to your Titan, Helios or Hyperion power supply. Male to female cable.

Seamless Runtime
To ensure that your Astera light’s batteries last throughout your entire production, you can select how many hours they have to last. This limits the light’s output to a level where you get the maximum brightness to achieve the selected runtime.

Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat. Turn multiple programs and lights into scenes.

Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.

Anti-Theft
When enabled, the integrated theft alarm gives visual and audible alarm if lights are being moved. In addition, the AsteraApp also shows the alarm.

Emergency Light
With this innovative feature, the lights can double as a battery-powered emergency light. When activated, the fixture can detect power loss and instantly switches to bright white light to illuminate the venue.