Astera AF80 PlutoFresnel - AF80
Astera
AS-AF80
Bestel
  • Beschrijving
  • Meer

Astera AF80 PlutoFresnel

• Astera PlutoFresnel AF80 in the box:
• 1 x PlutoFresnel (AF80)
• 1 x Fresnel Lens for PlutoFresnel (AF80-FL)
• 1 x Barndoors for PlutoFresnel (AF80-BD)
• 1 x Yoke for PlutoFresnel (AF80-YK)
• 2 x YokeBase for PlutoFresnel (AF80-YKB)
• 1 x TVMP Adapter (AX-TVMP)
• 1 x TrackHandle (AX-THD)

Needs FP3-CHR Charger (not Included)

Also available as PlutoFresnel kit - AF80-KIT

Astera’s battery-powered spotlight with Fresnel Lens the PlutoFresnel AF80 uses the same led engine as the well-known Titan Led Tubes which makes it an exceptional solution for film, studio and event lighting. The Astera PlutoFresnel boasts an impressive output comparable to a traditional 300W Tungsten Fresnel. With a beam angle of 15° to 60° without color fringing, wireless and wired DMX control, these lights offer impressive performance while consuming only 80W. Easy to mount and adjust with removable handles and YokeBases, they enhance creativity and productivity on any set.

The Astera PlutoFresnel can be controlled via the AsteraApp, Wireless DMX, Wired DMX and on the fixture itself.

Astera PlutoFresnel AF80 specifications:
• LED Engine: Titan LED Engine
• Colors: RGBMintAmber
• Total LED Power: 105W
• LED Power Draw: 80W
• Luminous Flux 3200K: 2.232 Lumens
• Luminous Flux 4000K: 2.642 Lumens
• Luminous Flux 5500K: 2.847 Lumens
• Light Output 5500 K 15° at 1m: 38.167 Lux
• Light Output 5500 K 35° at 1m: 10.028 Lux
• Light Output 5500 K 60° at 1m: 2.872 Lux
• CRI (Ra)/ TLCI 3200- 6500 K: >96
• Beam Angle: 15° – 60°
• Field Angle: TBD
• Strobe: 0 – 25 Hertz
• Pixels: 1
• Battery Runtime: up to 20 hours
• Battery Runtime max. Brightness: 3h
• Battery Lifetime: 80 % after 400 cycles
• DC Input: 24 VDC, 80W
• DC Connector: 5.5 mm x 2.1 mm
• Power Consumption (max.): 80W
• Wired DMX: Yes (via FP3-DTL / PWB-2-86)
• CRMX Receiver: Built-in
• BluetoothBridge BTB: Built-in
• Wireless Protocols: CRMX, UHF, Bluetooth, WiFi
• Wireless Range: CRMX/UHF Up to 100 m / Bluetooth Up to 3 m
• RDM Support: Wireless
• Infrared Control: Yes
• ControlSync: No
• TouchSlider: Yes
• Housing Material: Polymer & Metal
• IP Rating unwired: IP55 (only with PB15-PLG)
• IP Rating wired: IP55 (only with PWB-CAB-0.2/-1.5/-5/-10/-15)
• Ambient Operating Temperature: 0 – 40 °C
• Weight (with AF80-FL, AF80-BD): 4.637 kg
• Weight (with AF80-FL, AF80-BD, AF80-YK, 2x AF80-YKB, AF80-THD): 6.493 kg
• Dimensions L x W x H: 281.9 mm x 153.5 mm x 161.8 mm
• Dimensions L x W x H (with AF80-YK, 2x AF80-YKB): 281.9 mm x 244.7 mm x 323 mm
• Mounting Options: 4 x AirlineTracks, 1/2" hole, 3/8" thread, 1 x BrickMount (PB15-BMO)



Astera PlutoFresnel features:

• Built-in Battery
3 hours on MAX Runtime
Unlike traditional Fresnels, this light has a built-in battery that lasts 3 hours displaying white colors on MAX Brightness. When a longer operation is needed, you can set the Seamless Runtime setting up to 20 hours. For longer installations, PlutoFresnel can be connected to 24V DC power.

• External Battery Option
With RuntimeExtender
For a longer operational time, a RuntimeExtender with V-Mount or Gold Mount battery can be connected. The light’s Yoke is designed to attach this device easily. External batteries can charge the light’s internal battery. You can use either 14.4V or 26V batteries.

The RuntimeExtender is a battery plate to connect standard camera batteries to many Astera lights. This enables you to extend your production and work without worries when shooting films or lighting events. The RuntimeExtender supports a wide range of Astera products.

• Zoomable Fresnel
This next generation Fresnel lens works in conjunction with a light pipe that is built into the fixture. It creates an even beam with steep fall-off and no chromatic aberration or color fringing. The manual zoom ranges from 15° - 60° and allows it to be opearated as spotlight, washlight and anything in between.

• Barndoor
Included with each light is a eight-leave Barndoor. Its specific design leads to ultra-clean cuts; the edges stay razor sharp when shaping your beam.

• Open Face
For additional versatility, the Fresnel lens can be slid out after opening its lock. This gives you a wider beam with even crisper shadows..

• Projection Lens
A custom-built projection lens with 16°- 36° zoom, manual focus and 4 shutters. Turn your LeoFresnel into a profile that also allows you to insert E size Gobos.

• Foldable Legs
Simply fold out the 2 legs and place the light on the floor. This allows fast operation and enables creative new lighting techniques.

• Airline Tracks
Included are the popular Airline Tracks on each of the 4 sides. This is where you can attach the YokeBase as well as other Astera accessories such as TrackHandle, TrackPin etc.

• Yoke Quick-Release
Detach your light within seconds from its bracket to allow handheld operation.

• Detachable YokeBase
The YokeBase attaches to the light’s side via airline tracks. Move position if you want to change the light’s balance or remove it altogether.

• Removable Handle
The TrackHandle can be inserted into the light’s airline track to carry it around or adjust its position during operation. It can be removed whenever it isn’t needed.

• TVMP Adapter
With each light a standard TVMP Adapter is included that is intended to be connected to the light’s Yoke so it can be attached to stands and grips.

• RuntimeExtender Mount
The PlutoFresnel Yoke contains a mounting point for Astera’s RuntimeExtender. This allows you to attach external batteries.

RuntimeExtender is a battery plate to connect standard camera batteries to many Astera lights. This enables you to extend your production and work without worries when shooting films or lighting events. The RuntimeExtender supports a wide range of Astera products.