Astera AF250-KIT LeoFresnel KIT - AF250-KIT
Astera
AS-AF250-KIT
Bestel
  • Beschrijving
  • Meer

Astera AF250-KIT LeoFresnel KIT

• Astera AF250 LeoFresnel in the box: 1 x LeoFresnel (AF250)
1 x Fresnel Lens for LeoFresnel (AF250-FL)
1 x Barndoors for LeoFresnel (AF250-BD)
1 x Yoke for LeoFresnel (AF250-YK)
2 x YokeBase for LeoFresnel (AF250-YKB)
1 x TVMP Adapter (AX-TVMP)
1 x TrackHandle (AX-THD)

1 x Rabbit-Rounder Adapter (AF250-RRA)
1x Powercon True1 Cable
1x Case (AF250-CSE)

Astera’s battery-powered spotlight with Fresnel Lens the LeoFresnel AF250 uses the same led engine as the well-known Titan Led Tubes which makes it an exceptional solution for film, studio and event lighting. The Astera LeoFresnel is comparable to a traditional 1000W Tungsten Fresnel. With a beam angle of 15° to 60° without color fringing, wireless and wired DMX control, the LeoFresnel offers impressive performance while consuming only 250W. The Astera LeoFresnel is easy to mount and adjust with removable handles and yokeBases, they enhance creativity and productivity on any set.

The Astera LeoFresnel can be controlled via the AsteraApp, Wireless DMX, Wired DMX and on the fixture itself.

Astera LeoFresnel AF250 specifications:
• LED Engine: Titan LED Engine
• Colors: RGBMintAmber
• Total LED Power: 350W
• LED Power Draw: 250W
• CRI (Ra)/ TLCI 3200- 6500K: >96
• Beam Angle: 15° – 60°
• Field Angle: TBD
• Strobe:: 0 – 25 Hertz
• Pixels: 1
• Battery Runtime: up to 20 hours
• Battery Runtime (max. Brightness): 2 h
• Battery Lifetime: 80 % after 400 cycles
• DC Input: 12 – 48 VDC; max. 15A
• DC Connector: 3pin XLR (Pin 1:- Pin 2:+)
• AC Input: 100 – 240 VAC, 50/60 Hertz, 3.8A, 250W
• AC Connector: PowerCON TRUE1 Input/Output
• Wired DMX: Yes
• CRMX Receiver: Built-in
• BluetoothBridge BTB: Built-in
• Wireless Protocols: CRMX, UHF, Bluetooth, WiFi, RDM
• Wireless Range: CRMX/UHF up to 300 m / 330 yds Bluetooth up to 3m
• Infrared Control: Yes
• ControlSync: No
• TouchSlider: Yes
• Housing Material: Polymer & Metal
• IP Rating unwired: IP55
• IP Rating wired: IP55
• Ambient Operating Temperature: 0 – 40 °C
• Weight (with AF250-FL, AF250-BD): 13.83 kg
• Weight (with AF250-FL, AF250-BD, AF250-YK, 2x AF250-YKB): 16.32 kg
• Dimensions L x W x D: 455 mm x 215 mm x 240 mm
• Dimensions L x W x H (with AF250-YK, 2x AF250-YKB, AX-TVMP, AX-THD): 455 mm x 371 mm x 545 mm
• Mounting Options: AirlineTracks, Yoke with 2x BrickMount (PB15-BMO) and 1/2" mounting hole



Astera LeoFresnel Features:

• Built-in Battery
2 hours on MAX Runtime

Unlike traditional Fresnels, this light has a built-in battery that lasts 2 hours displaying white colors on MAX Brightness. When a longer operation is needed, you can set the Seamless Runtime setting up to 20 hours. For longer installations, connected to AC power via Powercon in+out sockets.

• External Battery Option
With RuntimeExtender
For a longer operational time, one or two RuntimeExtender’s with V-Mount or Gold Mount battery can be connected. With one 14.4V battery, the light can be operated on reduced power. A single 26V battery or two 14.4V batteries allow full power output.

The RuntimeExtender is a battery plate to connect standard camera batteries to many Astera lights. This enables you to extend your production and work without worries when shooting films or lighting events. The RuntimeExtender supports a wide range of Astera products.

• Zoomable Fresnel
This next generation Fresnel lens works in conjunction with a light pipe that is built into the fixture. It creates an even beam with steep fall-off and no chromatic aberration or color fringing. The manual zoom ranges from 15° - 60° and allows it to be opearated as spotlight, washlight and anything in between.

• Barndoor
Included with each light is a eight-leave Barndoor. Its specific design leads to ultra-clean cuts; the edges stay razor sharp when shaping your beam.

• Open Face
For additional versatility, the Fresnel lens can be slid out after opening its lock. This gives you a wider beam with even crisper shadows.

• Projection Lens
Coming late 2024
A custom-built projection lens with 16°- 36° zoom, manual focus and 4 shutters. Turn your LeoFresnel into a profile that also allows you to insert B size Gobos.

• Rabbit-Rounder Adapter
With each LeoFresnel a Rabbit Rounder Adapter is included which means that universal DOP Choice products for Rabbit-Rounder such as Octa 3, Lantern M and Snapbag M can be attached to the light.

• Yoke Quick-Release
Detach your light within seconds from its bracket to allow handheld operation.

• Detachable YokeBase
The YokeBase attaches to the light’s side via airline tracks. Move position if you want to change the light’s balance or remove it altogether.

• Airline Tracks
• Removable Handle
The TrackHandle can be inserted into the light’s airline track to carry it around or adjust its position during operation. It can be removed whenever it isn’t needed.

• Airline Tracks
Included are the popular Airline Tracks on each of the 4 sides. This is where you can attach the YokeBase as well as other Astera accessories such as TrackHandle, TrackPin etc.

• TVMP Adapter
With each light a standard TVMP Adapter that is intended to be connected to the light’s Yoke so it can be attached to stands and grips.

• RuntimeExtender Mount
The light’s Yoke contains a mounting point for Astera’s RuntimeExtender. This allows you to attach external batteries.